Concrete contents

You may suspicious about our GB0-371-ENU exam braindumps: Constructing H3C High-Performance Campus Networks, actually, we have get social recognition around the world in this kind of area, and trying to make it better beyond the average. So our GB0-371-ENU certification training not only with the useful knowledge will be tested in the real test, but with distinctive features. So after using it 20-30 hours diligently, you can pass the test effortlessly. Because we keep the new content into the H3C GB0-371-ENU dumps materials and send them to you instantly once you buy our questions lasting for one year. By using our GB0-371-ENU preparation materials: Constructing H3C High-Performance Campus Networks, your preparation will be full of joyful feelings.

High quality questions

There are nothing irrelevant contents in the GB0-371-ENU exam braindumps: Constructing H3C High-Performance Campus Networks, but all high quality questions you may encounter in your real exam. Many exam candidates are afraid of squandering time and large amount of money on useless questions, but it is unnecessary to worry about ours. You will not squander time or money once you bought our GB0-371-ENU certification training. If you are uncertain about it, there are free demos preparing for you freely as a reference. With the high quality features and accurate contents in reasonable prices, anyone can afford such a desirable product of our company. So it is our mutual goal to fulfil your dreams of passing the H3C Constructing H3C High-Performance Campus Networks actual test and getting the certificate successfully.

Aftersales services for customers

Many former customers are thankful for and appreciative of our GB0-371-ENU exam braindumps: Constructing H3C High-Performance Campus Networks. We always offer assistance to our customers when they need us and offer help 24/7. The most important is our employees are diligent to deal with your need and willing to do their part at any time. They always treat customers with curtesy and respect and the most important one---patience. So you can contact with us if you have problems about GB0-371-ENU preparation materials: Constructing H3C High-Performance Campus Networks without hesitation.

Time is scooting like water. Let us hold the change and we sincerely hope you can arrive at your dreaming aims. And your life can be enhanced by your effort and aspiration. Finally, the H3C GB0-371-ENU certification training materials will bring you closer to fulfill the challenge of living and working. Good luck.

After purchase, Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

The way to success is various, including the hard effort with perspiration and sometimes, the smart and effective way, which is exactly what our GB0-371-ENU exam braindumps: Constructing H3C High-Performance Campus Networks are concluded. To those who pass the Constructing H3C High-Performance Campus Networks actual test before, we contact with them and found they are not far smart than you or just being fortunate---because of the right way they choose and the way is our GB0-371-ENU certification training. If you want to pass the test effectively, take a comprehensive look of the features of GB0-371-ENU test simulate as follow:

H3C GB0-371-ENU Exam Syllabus Topics:

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

1. In the network connection as shown in the figure, SWA and SWB enable STP and Loopback-detection at the same time. Please confirm that the port status description of SWA and SWB is correct.

A) G1/0/1 of SWA may be blocked by STP detecting the existence of a loop
B) STP detects the existence of a loop between G1/0/2 or G1/0/3 of SWB and blocks one of them
C) Between G1/0/2 and G1/0/3 of SWB, loopback-detection detects the existence of a loop and blocks one of them

2. In the PIM-DM network as shown in the figure, part of the unicast routing table of routers RT1 and RT2 is as follows:
<RT1>display ip routing-table
Routing Tables: Public
Destination/MaskProtoPreCost NextHop Interface
1.1.1.0/24xxxxP1-1 C1-110.1.1.1POI11
1.1.0.0/16xxxxP1-2 C1-210.1.1.1Port1
<RT2>display ip routing-table
Routing Tables: Public
Destination/MaskProtoPreCost NextHop Interface
1.1.1.0/24XXXX P2-1 C2-111.1.1.1Port2
1.1.1.1/32XXXX P2-2 C2-211.1.1.1Port2
Then, when routers RT1 and RT2 perform Assert, the winner should be

A) If P1-1<P2-1, C1-1<C2-1, RT1 wins
B) If P1-1<P2-2, C1-1<C2-2, RT2 wins
C) If P1-1=P2-1, C1-1=C2-1, then RT1 wins
D) If P1-1=P2-1, C1-1>C2-1, then RT1 wins
E) If P1-1=P2-2, C1-1=C2-2, then RT2 wins
F) If P1-1=P2-2, C1-1>C2-2, then RT2 wins

3. In the switching network as shown in the figure, set VLAN10 to Isolate-user-vlan VLAN2 and VLAN3 to the Secondary VLAN of VLAN 10 on the switch SWA; create VLAN2? VLAN20 on the switch SWB, and set VLAN20 to Isolate-user-vlan, The Secondary VLA with VLAN4 being VLAN20 can be judged after setting the IP address of each device as shown in the figure

A) PCA can communicate with SWB
B) PCA can communicate with PCC
C) PCA can communicate with PCB
D) PCA can communicate with SWA
E) SWA can communicate with SWB

4. The following statements about the registration process of PIM SM are correct (choose one or more)

A) After the RP receives the source registration message for the first time, it will send a (*, G) join message to the multicast source and establish (*, G) entries along the way
B) After the RP normally receives the multicast forwarded traffic from the multicast source, it forwards the multicast to its downstream interface until the multicast receiver, forming an RPT from the RP to the multicast receiver along the way.
C) Unlike the PUSH method of PIM DM, in PIM SM, the multicast source only starts to send multicast traffic when there are downstream receivers
D) When a multicast source initially sends traffic, the connected DR will encapsulate several empty Register messages to register with the RP

5. The IP address of the host PCA is 40.1.1.1 and the MAC address is 0011.1111.11, which is connected to the GigabitEthernet 1/0/1 port of the switch. The following commands are configured on the switch:
[H3C]vlan 10
[H3C-vlan10]quit
[H3C]vlan 20
[H3C-vlan20]protocol-vlan ipv4
[H3C-vlan20]quit
[H3C]vlan 30
[H3C-vlan30]quit
[H3C]mac-vlan mac-address 0022-2222-2222 vlan 30
[H3C]vlan 40
[H3C-vlan40]ip-subnet-vlan ip 40.1.1.0 255.255.255.0
[H3C-vlan40]quit
[H3C]interface GigabitEthernet 1/0/1
[H3C-GigabitEthernet1/0/1]port link-type hybrid
[H3C-GigabitEthernet1/0/1]port hybrid pvid vlan 10
[H3C-GigabitEthernet1/0/1]port hybrid vlan 10 20 30 40 untagged
[H3C-GigabitEthernet1/0/1]port hybrid protocol-vlan vlan 20 0
[H3C-GigabitEthernet1/0/1]port hybrid ip-subnet-vlan vlan 40
[H3C-GigabitEthernet1 /0/1 ]mac-vlan enable
After the configuration is complete, it can be judged that PCA will join

A) VLAN20
B) VLAN 10
C) VLAN40
D) VLAN30

Solutions: