Get Instant Access to HPE6-A80 Practice Exam Questions [Q24-Q46]

Get Instant Access to HPE6-A80 Practice Exam Questions

Reliable Study Materials & Testing Engine for HPE6-A80 Exam Success!

HP HPE6-A80 certification exam, also known as the Aruba Certified Design Expert Written exam, is designed to evaluate the skills and knowledge of individuals in the field of network design using Aruba products and solutions. Aruba Certified Design Expert Written Exam certification is aimed at network architects, engineers, and consultants who are involved in designing complex enterprise networks, including wired, wireless, and remote access solutions. HPE6-A80 exam covers a wide range of topics, including network architecture and design principles, security, scalability, and troubleshooting.

 

NEW QUESTION # 24
Refer to the exhibit.

The exhibit shows the topology for a new Aruba solution. The MCs are in a ctuster and support all of the wireless traffic in the network The core switches route all traffic and support all VLANS. The access fayer switches do NOT use tunneiednode. or dynamic segmentation.
The customer has indicated that it has these VLANS for user devices.
* VLAN 11 for Floori employee wired devices
* VLAN 12 for Floor 2 employee wired devices
* VLAN 13 tor Floor 3 employee wired devices
* VLAN 14 for Floor 4 employee wired devices
* VLAN 15 for Floor 5 employee wired devices
* VLAN 101 for all employee wireless devices
* VLAN 102 for all guest wireless devices
In which locations should the architect plan the VLANs?

• A. VLANs 11-15. 101. and 102 on both MCs. (Other VLANs will be used on the access layer switches.)
• B. VLANS 11-15 on the access layer switches on the corresponding floor; VLANS 101 and 102 on both MCS.
• C. VLANs 11-15 on the access layer switches on the corresponding floor; VLAN 101 on one MC and VLAN 102 on me other MC
• D. VLANs 11-15 on one MC. VLANs 101 and 102 on the other MC. (Other VLANs will be used on the access layer switches.)

Answer: C

NEW QUESTION # 25
An indoor basKetbaiI stadium has 5.000 seats in two rings:
* The stadium has a ceiling height of GO feet (18 m).
* There is a catwalk around the perimeter of the basketball court, between the court and the seating areas.
* This catwalk is 40 feet (12 m) from the floor.
* There are two scoreboards at either end of the stadium.
* The construction of the stadium is concrete and sleet.
The customer does not want an under-seat, picoceli deployment.
Which AP model is appropriate to provide coverage in the main stadium bawl?

• A. AP-555
• B. AP-575
• C. AP-505
• D. AP-577

Answer: D

NEW QUESTION # 26
Refer to exhibit.

A customer has a building that needs a switch upgrade. The customer would like at least 20Gbps for the uplink bandwidth out of each closet. The building wiring plan is shown in Exhibit i. The customer will not consider any cabling upgrades at this point. The current proposal is shown in Exhibit 2.
Which correction must the architect make to the proposal to meet the customer requirements?

• A. Add an aggregation layer, and connect wiring closet switches to the aggregation layer with SFP+- SR transceivers
• B. Change the SR transceivers tor each link between the wiring closet switches and me network core to LRM transceivers
• C. Add a mode conditioning cable for each link between the wiring closet switches and the network core.
• D. Add an aggregation layer, and connect wiring closet switches to the aggregation layer on Smart Rate pons.

Answer: C

NEW QUESTION # 27
Refer to the exhibit.

A customer requires a core switching solution for a very large multi-building campus with about 30;ooo wireless clients and devices. The network will have a flat topology as shown in the exhibit, and MCs will forward all wireless traffic to the core for routing.
The customer had considered Aruba 5400R Series switches, but the architect recommends Aruba S320 switches Instead.
How should the architect justify this recommendation?

• A. The 3320 switches support a higher density of 10GbE fiber ports than the 5400R Series.
• B. The 8320 switches are required to eliminate the aggregation layer as the customer desires.
• C. The 3320 switches offer more extensive mobility integration features with Aruba MCs and APs than the 54C0R Series switches do.
• D. The 8320 switches have greater performance and larger ARP tables than the 54Q0R Series, as is necessary for a network this size.

Answer: C

NEW QUESTION # 28
What is one customer requirement that can drive the need for a relatively dense AP deployment. In which ire coverage areas of at least three AP radios overlap?

• A. support for beacon management
• B. AP operation as hybrid AMs for IDS/WIPS
• C. the deployment of dual SGHz radio APs
• D. location tracking of wireless loT devices

Answer: A

NEW QUESTION # 29
For which scenario do Aruba CX 6300M Series switches meet the needs for an upgrade of the wired access layer while the Aruba CX 630QF Series switches do not?

• A. The Aruba CX6300M supports 10GBase-T connectivity with AP-515.
• B. The Aruba CX 630DM support up to 75W PoE+ per port
• C. The customer wants to utilize LACP on AP515 in VSF switch configuration.
• D. The customer wants to utilize the Aruba AP-515 support for 002 3bz connectivity.

Answer: B

NEW QUESTION # 30
Refer to the exhibit.

Exhibit: A49.01114316-102
The architect has determined that this building requires two 10GPE links to the data center.
What is the correct transceiver type for the links?

• A. SFP+ LRM
• B. SFP+ LR
• C. 3FP+ LRM with mode conditioning
• D. SFP+ SR

Answer: A

NEW QUESTION # 31
Refer to the exhibit.

This warehouse has the dimensions shown in the exhibit. The warehouse is 20 feet (6 m) high up to a steel railing on the celling. The shelves are about 16 feet (5m) high, and they hold large containers filled with fluid and metal equipment.
The customer needs consistent wireless coverage throughout the warehouse, mostly to support the tablets that employees use to run Inventory tracking and other applications. The warehouse staff works in shifts of 20.
The architect has selected AP-515S. About how many APs should the architect propose?

• A. about 6-8
• B. about 13-16
• C. about 6-4
• D. about 23-32

Answer: A

NEW QUESTION # 32
A network architect plans to propose a virtual Mobility Master (VMM) tor a new solution. The solution will support up to 4.800 wireless client devices and include:
* two Virtual Mobility controllers (VMCs) in a cluster
* 180 APs
Which licenses should the architect propose?

• A. 1 MM-VA-500; 1 MC-VA-250; 180 Enterprise licenses
• B. 1 MM-VA-IK:I MC-VA-250; 180 Enterprise licenses
• C. 1 MM-VA-1K; 2 MC-VA-25Q; one Enterprise license
• D. 1 MM-VA-500; 2 MC-VA-250; 540 Enterprise licenses

Answer: B

NEW QUESTION # 33
Refer to the exhibit.

A hospital needs an upgrade to 802.1tax for its wireless network. The wireless network supports:
* wireless medical devices
* medical staff voice communicators
* laptops in nurse stations
* medical staff tablets
* visitor and patient personal devices.
All of these devices support both the 2 4GHz and 5GH2 band. Assuming about a max throughput on50 Mbps per AP; the hospital would like. The architect has used VisualRF to plan the AP placement on one of the floors, which the hospital expects will need to suppod about 800 win to deploy APS in stairwells between floors.
How well does the plan meet the requirements?

• A. The current AP placement fails to account for the lead-lined wails that are common in patient and exam rooms.
• B. The current AP placement meets coverage requirements, but does not meet capacity requirements.
• C. The current AP placement meets the customer requirements in terms of coverage and capacity.
• D. The current AP placement fails to provide adequate signal for the voice communicators in several areas

Answer: A

NEW QUESTION # 34
Refer to the exhibit.


A customer needs to support resilient wireless services
What is one way that this design helps to minimize me impact of a railed access layer switch on these services?

• A. APS in the same area connect to different switches.
• B. Each access layer switch has two redundant links to the core.
• C. The 8400s and G405s use Virtual Switching Extension (VSX) in cone and access.
• D. The switches support Smart Rate and dual home AP connections.

Answer: D

NEW QUESTION # 35
What is one reason to deploy an Aruba CX switch when compared to an ArubaOS switch?

• A. to obtain API-enabled programmability for greater automation
• B. to support Zero Touch provisioning (ZTP)
• C. to support Aruba Dynamic Segmentation
• D. to obtain higher wattage power modules for enhanced PoE+ support

Answer: D

NEW QUESTION # 36
Refer to the exhibit.

The exhibit shows the design for an existing network. The customer intends to replace the current Core switches with two Aruba 8400 switches.
What are two points that the architect should ensure that the customer understands? (Select two.)

• A. The 8400 switches run different software than the 5400R switches.
• B. The 8400 switches do not support VSF.
• C. The 8400 switches are fixed port switches.
• D. The 8400 switches cannot be monitored by AirWave.
• E. The 8400 switches have a smaller ARP table than the 540OR switches.

Answer: A,E

NEW QUESTION # 37
A network architect needs to plan quality of service (QoS) for a hospital network.
Which of these applications should receive the highest priority?

• A. MRI image transfer
• B. streaming IPTV in lobbies
• C. cloud-based scheduling software
• D. wireless voice communicator devices

Answer: C

NEW QUESTION # 38
Refer to the exhibit.

A hotel needs a wireless solution, i he hotel has 802.3af switches.
The architect has selected the 505H Series, controlled by a local MC as the best choice The 5QoH series will need to power a connected phor which have only a single Ethernet port. The architect has created the BOM shown in the exhibit. (Note that this portion of the BOM does not inc Which correction should the architect make?

• A. Upgrade to PoE+ switches.
• B. Change the 5Q5H to the 3Q3HR model.
• C. Remove the mounting adapters.
• D. Propose new direct power source for phone.

Answer: D

NEW QUESTION # 39
Refer to the exhibit.

A customer has the wined infrastructure shown in the exhibit. The customer is in the process of expanding their wireless services They will now add a new wireless solution, with mobility controllers (MCs) connected as shown. The new wireless solution will support a total of 450 APs and about 26,000 wireless devices. It must provide seamless roaming across the entire campus.
After the new deployment, both wired and wireless devices experience IP connectivity issues.
Which change to the existing infrastructure should the architect recommend to support all of the customer requirements?

• A. The MCs should be moved to the aggregation layer, and more MCs added
• B. The wired VLANS should be combined into a single VLAN and n6 subnet
• C. The core switches should be replaced with switches that have larger ARP tables.
• D. The core and aggregation switches should disable Virtual Switching Framework (VSF).

Answer: D

NEW QUESTION # 40
A customer has an Aruba wireless netwofK with:
* Two 7205 Mobility Controllers (MCs) in a cluster - Each MC must be able to support the complete network in the case of an MC failure
* 250 APs. which support a total of 7.500 devices
* A virtual CxQCQ ClearPass appliance with 1QK Access licenses
* An MM-HW-1K appliance
The customer is interested in an upgrade to Aruba CX Switches, primarily to benefit from the per-user tunneled node feature. The customer requires support for 2500 ports, and 95 percent of wined endpoints will use tunneled node.
Which change to the existing solution should the architect explain?

• A. A new controller will be required to support sufficient clients, including the wired ones.
• B. A separate ClearPass virtual appliance will be required to integrate with the AQS-Switches
• C. The Mobility Master will need more MM licenses to support the wired endpoints that use tunneled node.
• D. The clustering feature will need to be disabled on the controllers, so that they can support tunneled node.

Answer: D

NEW QUESTION # 41
The architect plans to recommend an upgrade to Aruba CX switches
What is one requirement for the new solution that justifies this recommendation?

• A. the requirement to support smart Rate at the access layer
• B. the requirement to support tunneled-node at the access layer
• C. the requirement to support larger ARP tables at the aggregation layer
• D. the requirement to support secure IPsec tunneling at the aggregation layer

Answer: D

NEW QUESTION # 42
in which scenario do Aruba CX 6400 Series switches, but not Aruba 6300M Series switches, meet the needs Tor a wired upgrade?

• A. The customer requires each access layer switch to support at least 25Gbps on its fiber uplinks at all times; including if up to one uplink tails.
• B. The customer requires switches in the same closet to operate together as a single switch for Link Aggregation but to be managed as separate devices.
• C. The customer requires enhanced redundancy at the access layer and wants to ensure that each switch can continue to operate even if a power supply fails
• D. The customer has recently deployed Aruba AP-535 APs and is concerned about a future-proof wired edge that will continue to support expanding bandwidth requirements.

Answer: B

NEW QUESTION # 43
A customer has critical wired endpoints. However, each endpoint has a single Ethernet connection to the network. The customer wants redundancy in the switch access layer to minimize the chances that an endpoint will lose this connection The architect plans to deploy two Aruba CX 6405 switches in the closet.
Which plan provides the greatest redundancy for this scenario?

• A. The 6405 switches are not in a vsF fabric, and have redundant power supplies but not redundant management modules.
• B. The 6405 switches are not in a VSX fabric, and have redundant power supplies and redundant management modules.
• C. The 6405 switches are in a VSX fabric, and each has a redundant management module but not a redundant power supply.
• D. The 6405 Switches are in a VSF fabric, so the individual switches do not need redundant components.

Answer: C

NEW QUESTION # 44
Refer to the exhibit.

The exhibit shows the current AP deployment In a warehouse that stores frozen food goods:
* APs are mounted on the ceiling, which is 15 feet (4.6 m) high.
* Shelves are 12 feet (3.7 m) high and are typically fully stocked.
This customer indicates that their current wireless performance is inadequate.
What should the network architect include in the new solution to resolve this issue?

• A. APS deployed on the ceiling in the same current locations, out with dual 5GHz radios
• B. APs deployed with directional antennas on the ceiling, due to the high 15-foot callings
• C. APs deployed with directional antennas and a hybrid wall-mount, ceiling-mount design
• D. APs deployed on the ceiling in each aisle, due to the high absorption between aisles

Answer: D

NEW QUESTION # 45
Refer to the exhibit.

The network architect has created the 60M shown in the exhibit tor a complete new wired ana wireless solution for a customer. This solution the customer wants to discover and manage every component or the network in Airwave, including twins, MCS, APS, and switches.
How many AirWave licenses dees the architect need to add?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: C

NEW QUESTION # 46
......

HP HPE6-A80 (Aruba Certified Design Expert Written) Certification Exam is a valuable certification for network professionals who are looking to enhance their skills in network design and security. Aruba Certified Design Expert Written Exam certification demonstrates expertise in designing complex wireless networks that meet the requirements of business-critical applications. Passing the HPE6-A80 certification exam can help professionals advance their careers in network design and security and is recognized by industry leaders.

 

Validate your Skills with Updated HPE6-A80 Exam Questions & Answers and Test Engine: https://lead2pass.examdumpsvce.com/HPE6-A80-valid-exam-dumps.html